基于结构方程的旅游环境承载系统耦合关联与作用机理

构建旅游环境承载力评价体系,运用耦合度指数和结构方程模型揭示山东半岛蓝色经济区旅游环境承载系统的耦合演化规律和动态关联特征.研究表明,半岛蓝色经济区7市各子系统的承载指数均呈增长态势,各承载子系统之间存在耦合作用,协调发展水平均稳步上升,生态承载子系统对经济承载子系统产生正影响,社会承载子系统可通过生态承载子系统对经济承载子系统产生正向影响力.     

Temperature-dependent sorption of polycyclic aromatic hydrocarbons on natural and treated sediments

In aqueous environment temperature is considered to play a significant role in the sorption process of polycyclic aromatic hydrocarbons (PAHs) and its influence on the sorption equilibrium is indicative of sorption energies and mechanisms. In this study, sorptions of five PAHs on three heterogeneous sorbents including one river sediment (YHR), one estuary sediment (YRD) and one treated sediment with organic matter removed (IM) were carried out at a range of temperature from 5 °C to 35 °C. Stronger sorptions were observed at lower temperatures, with the equilibrium sorption coefficient K_d increasing 2-5 times as the temperature decreases 30 °C. The increase of K_d value was attributed primarily to the change of PAH water solubility, which predicted 40-75% of the increase of K_d in the sorption process. To provide insight into the sorption mechanism, enthalpy change (ΔH_S) for the sorption process was calculated and the values were observed to be negative for all of the interactions, suggesting that the exothermal sorption of PAHs inversely dependents on temperature. Based on the values of ΔH_S, van der Waals forces were inferred as the main sorption mechanism for the PAHs, especially on the YHR sediment which contained more organic matter. For sorption of larger size PAHs on the sorbents with low organic matter, specific interactions were deduced to contribute to the overall sorption.     

Platinum (IV) recovery from chloride solution by functionalized acrylic copolymers

Two acrylic adsorbents with different morphological structures and bearing amidoethylenamine and thiol groups were obtained and used for platinum sorption from chloride solution by the batch method. Physico-chemical parameters that influence adsorption such as initial Pt(IV) concentration, stirring time, pH, and adsorbent amount were investigated. The thermodynamic parameters of Pt(IV) sorption on the synthesized adsorbent were also evaluated based on Langmuir and Freundlich isotherms. Thermodynamic parameters estimated from Langmuir constants indicated that the adsorption is spontaneous, exothermic and there is a disordered state at the molecular level. The models used to analyze the sorption rate led to the conclusion that the most important step in the sorption of Pt(IV) could be both particle diffusion and chemical reaction of [PtCl₆]⁻ with amine functional groups. Thus, both the ion exchange and complex formation mechanisms can occur via nitrogen atoms in the recovery of Pt(IV) on the studied adsorbent.     

Monte Carlo analysis of field water flow comparing uni- and bimodal effective hydraulic parameters for structured soil

Soil structure critically affects the hydrological behaviour of soils. In this paper, we examined the impact of areal heterogeneity of hydraulic properties of a structured soil on soil ensemble behaviour for various soil water flow processes with different top boundary conditions (redistribution and drainage plus evaporation and infiltration). Using a numerical solution of the Richards' equation in a stochastic framework, the ensemble characteristics and flow dynamics were studied for drying and wetting processes observed during a time interval of ten days when a series of relatively intense rainfall events occurred. The effects of using unimodal and bimodal interpretative models of hydraulic properties on the ensemble hydrological behaviour of the soil were illustrated by comparing predictions to mean water contents measured over time in several sites at field scale. Although the differences between unimodal and bimodal fitting are not significant in terms of goodness of fit, the differences in process predictions are considerable with the bimodal soil simulating water content measurements much better than unimodal soil. We also investigated the relative contribution of the soil variability of each parameter on the variance of the water contents obtained as the main output of the stochastic simulations. The variability of the structural parameter, weighting the two pore space fractions in the bimodal interpretative model, has the largest contribution to water content variance. The contribution of each parameter depends only partly on the coefficient of variation, much more on the sensitivity of the model to the parameters and on the flow process being observed. We observed that the contribution of the retention parameters to uncertainty increases during drainage processes; the opposite occurs with the hydraulic conductivity parameters.     

棉秆基活性炭的制备及其对2,4-二硝基苯酚的吸附

以棉秆为原料，以KOH为活化剂，制备了高比表面棉秆基生物质活性炭。分析了制得的活性炭的元素组成、表面官能团、吸附能力等物化性能，探讨了浸渍比，活化温度，活化时间等工艺参数对制备活性炭得率、表面官能团、碘值、亚甲基蓝值等性能的影响，并通过静态吸附实验比较了不同条件下制备活性炭对2，4-二硝基苯酚的吸附性能，探讨了典型炭样品对2，4-二硝基苯酚的等温吸附特性。结果表明，KOH活化棉秆基生物质活性炭的表面物化性质随浸渍比、活化温度等工艺参数变化而变化，活化适宜条件为浸渍比1：3、活化温度800℃、活化时间90 min，在此条件下制得的炭样的碘值为1 251 mg/g，亚甲基蓝吸附值为478 mg/g，分别是国家一级品标准的1.25倍与3.54倍；对2，4-二硝基苯酚的Langmuir最大吸附量为747 mg/g，与Freundlich模型相比，Langmuir模型能较好地描述2，4-二硝基苯酚在炭样上的吸附行为，表明制备活性炭样品表面吸附位的能量分布较为均一。     

Interactions Among the Copper Species and Forms in Sea Water/Sediments and Copper Bioaccumulation in Oysters

Abstract

Earlier papers indicated that the first incident of green discoloration in oysters (Crassostrea gigas) and the mass mortality observed in 1986 along the Taiwan Erhjin Chi coastal area were caused by the higher contents of total copper and copper species (mainly bioavailable and free ion) in sea water. the copper in sea water would be sorbed by suspended matter and transferred to sediments, and the copper in the sediments would also be desorbed to sea water. Processes of copper adsorption and desorption are the major factors influencing the contents of total copper and copper species in sea water and sediments. in this study, the Erhjin Chi sediments were mixed with sea water by a shaker technique. When the mixture was shaken for one hour, analogous to tidal mixing in estuaries, only copper desorption from sediments was observed. If the shaking time is increased for more than 3 hours, the copper released from the sediments was resorbed to the remaining solid phases. the higher the contents of mud (91.71%) and total copper (701 mg kg^?1) in sediments, the higher the copper desorption rate (1.86 ppm hr^?1) and copper adsorption rate (0.50 ppm hr^?1) were observed. in sediments containing lower mud (0.80%) and lower copper (43.5 mg kg^?1), the copper desorption and adsorption rates were 0.83 ppm hr^?1 and 0.22 ppm hr^?1, respectively. the interactions among the total copper and copper species in sea water and sediments, chemical and ecological parameters, and copper bioaccumulation in oysters in the Erhjin Chi estuarine and coastal area are also discussed.     

Seasonal Differences in the Levels of Gaseous Air Pollutants in the Vicinity of a Waste Dump

Hydrogen sulphide, ammonia, nitrogen dioxide, mercaptans and sulphur dioxide (H₂S, NH₃, NO₂, R-SH, SO₂) concentrations were measured at the location in the vicinity of the waste dump to determine the air pollution level of these pollutants prior to the operation of the Mobile Thermal Treatment Plant. Samples were collected over one year period. Seasonal differences, and the influence of meteorological parameters (temperature, relative humidity, pressure and wind direction) on the air pollution levels were studied. Results show relatively low concentrations of H₂S, NO₂, R-SH and SO₂, while NH₃ levels were higher compared to the guideline values. Good weather conditions (high air pressure and low relative humidity) are connected to long range transport of NO₂, while higher temperatures result in elevated NH₃ and R-SH concentrations. Because of the predominant northeast wind direction (the same as the waste dump direction), the contribution of air pollution from the direction of the waste dump at the measuring site is significant, but that does not necessarily mean that the pollutants originated from that source.     

苏通大桥结构健康状态评估技术研究与应用(3):主梁损伤定位

为提高基于模态参数的损伤识别方法的损伤敏感性和噪声鲁棒性,将多源数据融合技术引入到苏通大桥主梁损伤定位方法中。基于D-S证据理论对模态柔度和模态应变能指标进行数据融合,并以苏通大桥扁平钢箱梁为分析对象,对融合后损伤定位指标的应用效果进行了讨论。结果表明:基于数据融合的损伤定位方法具有较强的损伤敏感性,只需要较少的低阶模态信息就能识别主梁的早期损伤;数据融合后,损伤定位指标可以在较强的噪声环境下准确地识别斜拉桥钢箱梁的损伤,具有较好的工程实用性。     

Synthesis, characterization and experimental investigation of Cu-BTC as CO2 adsorbent from flue gas

Porous Cu-BTC material was synthesized by the solvothermal method. Powder X-ray diffraction (PXRD) was used to test the phase purity of the synthesized material and investigate its structural stability under the influence of flue gas components. The thermal stability of the material was determined through thermal gravimetric (TG) analysis. Scanning electron microscopy (SEM) was employed to study the microstructure of the material. Cu-BTC was demonstrated not only to have high CO₂ adsorption capacity but also good selectivity of CO₂ over N₂ by means of packed bed tests. The adsorption capacity of Cu-BTC for CO₂ was about 69 mL/g at 22°C. The influence of the main flue gas components on the CO₂ capacity of the material were discussed as well.     

Dry deposition velocity of total suspended particles and meteorological influence in four locations in Guangzhou, China

Dry deposition velocity of total suspended particles (TSP) is an effective parameter that describes the speed of atmospheric particulate matter deposit to the natural surface. It is also an important indicator to the capacity of atmosphere self-depuration. However, the spatial and temporal variations in dry deposition velocity of TSP at different urban landscapes and the relationship between dry deposition velocity and the meteorological parameters are subject to large uncertainties. We concurrently investigated this relationship at four different landscapes of Guangzhou, from October to December of 2009. The result of the average dry deposition velocity is (1.49 ± 0.77), (1.44 ± 0.77), (1.13 ± 0.53) and (1.82 ± 0.82) cm/sec for urban commercial landscape, urban forest landscape, urban residential landscape and country landscape, respectively. This spatial variation can be explained by the difference of both particle size composition of TSP and meteorological parameters of sampling sites. Dry deposition velocity of TSP has a positive correlation with wind speed, and a negative correlation with temperature and relative humidity. Wind speed is the strongest factor that affects the magnitude of TSP dry deposition velocity, and the temperature is another considerable strong meteorological factor.We also find out that the relative humidity brings less impact, especially during the dry season. It is thus implied that the current global warming and urban heat island effect may lead to correlative changes in TSP dry deposition velocity, especially in the urban areas.